Skip to content
Lift-A-Loft SP Series
Lift-A-Loft’s SP Series was developed from the most proven design in scissor mechanisms, hydraulic systems, and safety devices. The platform with Extenda-Deck (optional) is designed for overhead construction or maintenance. The scissor lift unit is drivable and steerable at all elevations allowing easy positioning and reduced setup time.
Overview
- Drivable at Full Elevation
- Low Battery Detector with Lift interrupt
- On-Board Charger
- 24 Volt System
- Self-Closing Swing Gate
- Stable Boxed end Scissor Design
- Scissor Spreader
- Self Closing, Self Latching Gate
- Guardrails with Midrail and Toe Board
- Emergency Stop Button at Each Control Station
- Manual Override Lowering at Ground Level
- Lanyard Attachment Points
- Non-skid Flooring on Foot Traffic Areas
- Deadman Controls
- Holding Valve(s) on Lift Cylinder(s)
- Horn
Power Source:
- (4) 6 Volt Deep Cycle 275 AH Batteries Provide 24 Volt System with On Board Fully Automatic
- Non-Marking Tires
- Maintenance Free Batteries
- 4′ (1.22m) Extenda-Deck Front or Side Platform Extension
- Adjustable Work Light
- Flashing Light
- Motion Alarm
- Air Powered Units
- Air Line to Platform
- Padded Rails
- Aircraft Bumpers
- Custom Paint
Specs
700-1500 lb.PLATFORM CAPACITY
2.2 mph.DRIVE SPEED
25%GRADEABILITY
| MODEL | MACHINE WIDTH | MACHINE LENGTH | MACHINE HEIGHT | WORKING HEIGHT | CAPACITY | PLATFORM SIZE |
|---|---|---|---|---|---|---|
| SPN16 | 2 ft 6 in. | 6 ft 9 in. | 6 ft 7 in. | 15 ft 6 in. | 800 lb. | 75 x 30 in. |
| SPN20 | 2 ft 6 in. | 6 ft 9 in. | 6 ft 10 in. | 19 ft 10 in. | 700 lb. | 75 x 30 in. |
| SPW19 | 4 ft 2 in. | 7 ft 4 in. | 6 ft 6 in. | 19 ft 2 in. | 1500 lb. | 87 x 46 in. |
| SPW24 | 4 ft 2 in. | 7 ft 4 in. | 6 ft 11 in. | 23 ft 8 in. | 750 lb. | 87 x 46 in. |
Product specifications may not reflect the most current product details.