Rent or Buy Bendi Electric Deep Reach Articulating Forklift Forklifts in CT, MA, NY | Summit ToyotaLift Forklift
Logo for: Summit ToyotaLift
Electric Deep Reach Articulating Forklift

Bendi Electric Deep Reach Articulating Forklift

2,500 - 3,000 LB. LOAD CAPACITY

The Bendi model B40AC-DR / B50AC-DR will stack loads two deep in aisles as narrow as 96 in., has a base capacity of 2,500 lbs. (24 in. load center) and has lift heights available to 35.41 in. The reach from face to mast is 52 in., and the integral pantograph reach stroke is 41 in. The B40AC-DR / B50AC-DR has a 33 in. wide tilting and side shifting fork carriage.

New & Used Models Available for Purchase or Rent


Electric Deep Reach Articulating Forklift

The Bendi B40AC-DR / B50AC-DR is a 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires. The B40AC-DR / B50AC-DR can work inside and outside on paved surfaces and has a floating front axle allowing the truck to ride smoothly over uneven floors. The B40AC-DR / B50AC-DR does all of the jobs of a reach and counterbalanced truck but in much narrower aisles.

  • 2,500 lb. and 3,000 lb. capacity at 24 in. load center
  • Four-wheel design, dual rear wheel drive
  • Integral 8 in. stroke sideshifter and 36 in. high load backrest
  • Hydraulic power steering – front wheel steer
  • Independently controlled rear wheels allow independent speed control of each drive tire based on steering angle

Equipped with the Landoll DuraSteerTM front wheel hydraulic steering, the B40AC-DR / B50AC-DR provides exceptional control and makes load placement and retrieval superior to the competition.

The new mast has a rigid mounting and as standard, a tilting and side shifting carriage.  The new design offers increased mast rigidity, capacity and improved visibility.  Dual free lift cylinders and optimized hose and chain routings have improved visibility thru the mast.   Lowered heights have been reduced and a new mounting position on the 48 in. wide front axle reduces the distance from the face of the forks to the back of the axle thereby improving aisle performance.  Mountings for cameras have been integrated into the inner mast and an optional integral side shifting fork positioner combination is also available.

  • AC traction and hydraulic motors ensure minimal maintenace and high efficiency
  • High-efficiency curtis AC controllers provide trouble free operation
  • Interactive LCD status monitor (BDI with lift interrupt, hour meter with service monitor, diagnostic code display, input device calibration)
  • 48 Volt electrical system
  • Creep speed mode adds enhanced control when handling loads at high elevations or while training operators
  • Creep speed mode adds enhanced control when handling loads at high elevations or while training operators
  • Optional cold storage conditioned to -22°F (-30°C)


2,500 - 3,000 LBS.LOAD CAPACITY
B40AC-DR2,500248Up to 425
B50AC-DR3,000248Up to 425

* Based on 24" Load center
Product specifications may not reflect the most current product details.