Skip to content
Taylor 48″ LC ZH-Series Electric
The Taylor ZH-360L is the first 36,000 lb. battery electric forklift for all industries. It is powered by Permanent Magnet Synchronous Electric Motors and American manufactured NMC batteries. It also features an advanced E-axle that utilizes regenerative braking to assist with battery recharge during operation. This heavy capacity truck can lift 36,000 Ibs. on a 48-inch load center and operate uninterrupted through an average duty cycle of 8 hours.
Overview
- 11’ ULTRA-VU 2-Stage Mast (152-in lowered height)
- 100-in Pin-type “C” Carriage with individual fork positioning & side shift
- 4-in X 8-in X 96-in pin mounted Forks
- Permanent Magnet Synchronous Motor
- 90+/- minutes charging time
- High voltage electrical system (660 volt)
- Nickel-Manganese-Cobalt Battery Technology
- Dana E-axle (144 P453)
- Energy Recovery Technology (through regenerative braking)
- Taylor HD-300 welded steel Steer Axle (single hydraulic cylinder design with heavyduty links from the cylinder ram directly to tapered roller bearing mounted spindles)
- 12.00 X 20 – 24PR bias pneumatic drive and steer tires (high load)
- Enclosed 2-door steel all-welded DREAM Cab (includes dome light, wide angle mirrors, door hold back latches with trip handles, handrails, black floor mats and is isolation mounted for noise and vibration reduction)
- Cab heater and interior circulation fan
- Tinted glass with front and rear windshield wipers and front windshield washer
- Fully adjustable air ride swivel seat
- Multifunction Joystick mounted on adjustable armrest with integrated directional shift control
- Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
- Operator Presence System with timed idle and neutral shutdown (5 minute default, password adjustable from 1-120 minutes by end user)
- Taylor Integrated Control System (TICS) …see next page for additional info
- 7-in touch screen color display
- TaylorTrak Pro Advanced Fleet Telematics hardware
- The one-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
- Dual USB charging ports
- Hydrostatic, steer-on-demand power steering with tilt steering column
- Battery disconnect/lock-out switch
- (4) forward facing LED work lights (cab mounted)
- (2) rear facing LED work lights (“A” pillar mounted)
- (2) LED work lights (mast mounted)
- Key-type anti-restart ignition switch
- Dual electric trumpet horns (116 dBA)
- Keyswitch-actuated amber strobe light
- Forward and reverse-actuated warning alarms
- Operators Guide
- Maintenance and Service documentation including key circuit drawings (Serial Number Specific Parts Book is available upon request)
- Safety Check Manual and Video
- 24-volt electrical system
- Dual heavy-duty lead-acid batteries (for system startup)
- All wiring is color and number coded.
- Circuit breakers with heavy duty connectors (no automotive type fuses)
- Breaker reset switches
Specs
| MODEL NUMBER | WIDTH (IN.) | HEIGHT (IN.) | MAX FORK HEIGHT (IN.) | LOAD CAPACITY* (LBS.) | LIFT SPEED (FPM) | GRADEABILITY (%) | WHEELBASE (IN.) |
|---|---|---|---|---|---|---|---|
| ZH360L | 108.5 | 152 | 302 | 36000 | 68 | 32 | 148 |
* Based on 24" Load center
** Add load length and clearance
Product specifications may not reflect the most current product details. Authorized Taylor dealers retain the most current product specifications. All specifications should be verified by an authorized Taylor dealer prior to purchase.