Bendi Deep Reach High Lift Articulating Electric

2,500 - 3,000 LB. LOAD CAPACITY

The Bendi model B40AC-DR / B50AC-DR will stack loads two deep in aisles as narrow as 96 in., has a base capacity of 2,500 lbs. (24 in. load center) and lift heights available to almost 36 feet. The reach from face to mast is 52 in. and the integral pantograph reach stroke is 41 in. The B40AC-DR / B50AC-DR has a 33 in. wide tilting and side shifting fork carriage.

New & Used Models Available for Purchase or Rent

Request a Quote

Overview
Specs
Related Products

Overview

The Bendi B40AC-DR / B50AC-DR is a 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires. The B40AC-DR / B50AC-DR can work inside and outside on paved surfaces and has a floating front axle allowing the truck to ride smoothly over uneven floors. The B40AC-DR / B50AC-DR does all of the jobs of a reach and counterbalanced truck but in much narrower aisles.

Four wheel design, dual rear wheel drive
48 Volt Electrical System
Integral 8 in. stroke sideshifter
36 in. high load backrest
Hydraulic power steering (front wheel steer)
Independently controlled rear wheels allow independent speed control of each drive tire based on steering angle

Adjustable seat and steering wheel
Hand actuated parking brake

Creep speed mode adds enhanced control when handling loads at high elevations or while training operators
High visibility mast
Rear view mirror
Safety seat switch
Seat belt

AC traction and hydraulic motors ensure minimal maintenace and high efficiency
Interactive LCD status monitor (BDI with lift interrupt, hour meter with service monitor, diagnostic code display, input device calibration)
High-efficiency Curtis AC controllers provide trouble free operation