Logo for: Summit ToyotaLift

Bendi Deep Reach High Lift Articulating Electric

2,500 - 3,000 LB. LOAD CAPACITY

The Bendi model B40AC-DR / B50AC-DR will stack loads two deep in aisles as narrow as 96 in., has a base capacity of 2,500 lbs. (24 in. load center) and lift heights available to almost 36 feet.  The reach from face to mast is 52 in. and the integral pantograph reach stroke is 41 in. The B40AC-DR / B50AC-DR has a 33 in. wide tilting and side shifting fork carriage.

New & Used Models Available for Purchase or Rent

Overview

The Bendi B40AC-DR / B50AC-DR is a 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires. The B40AC-DR / B50AC-DR can work inside and outside on paved surfaces and has a floating front axle allowing the truck to ride smoothly over uneven floors. The B40AC-DR / B50AC-DR does all of the jobs of a reach and counterbalanced truck but in much narrower aisles.

  • Four wheel design, dual rear wheel drive
  • 48 Volt Electrical System
  • Integral 8 in. stroke sideshifter
  • 36 in. high load backrest
  • Hydraulic power steering (front wheel steer)
  • Independently controlled rear wheels allow independent speed control of each drive tire based on steering angle
  • Adjustable seat and steering wheel
  • Hand actuated parking brake
  • Creep speed mode adds enhanced control when handling loads at high elevations or while training operators
  • High visibility mast
  • Rear view mirror
  • Safety seat switch
  • Seat belt
  • AC traction and hydraulic motors ensure minimal maintenace and high efficiency
  • Interactive LCD status monitor (BDI with lift interrupt, hour meter with service monitor, diagnostic code display, input device calibration)
  • High-efficiency Curtis AC controllers provide trouble free operation
  • Non-standard fork lengths
  • LED headlights, flashing light and rear safety lights
  • Non-marking tires
  • Vinyl seat
  • Slide-out sideways battery tray
  • Fire extinguisher
  • Lazer fork height indicator
  • Carriage mounted camera with operator compartment
  • Optional cold storage conditioned to -22°F (-30°C)

Specs

24 IN.LOAD CENTER
96 IN.MINIMUM CLEAR AISLE CLEARANCE
48VOPERATING VOLTAGE
MODEL NUMBERLOAD CAPACITY* (lbs.)MAXIMUM LIFT HEIGHT (in.)WHEELBASE (in.)
B40AC-DR2,50042572.6
B50AC-DR3,00042572.6

* Based on 24" Load center
Product specifications may not reflect the most current product details.