Logo for: Summit ToyotaLift
Multi-Purpose Articulating Electric

Bendi Multi-Purpose Articulating Electric

3,000 - 5,500 LB. LOAD CAPACITY

The Bendi Multi-Purpose Articluating Electric line works in aisles as narrow as 70 in., has a base capacity starting at 3,000 lbs. at 24 in. load center and has lift heights available to 41 ft. 

New & Used Models Available for Purchase or Rent

Overview

The Bendi 4-wheel Multi-Purpose Articulating Forklift line is equipped with dual independently driven rear-drive tires and soft-poly front load tires. Excellent traction, braking and power enable climbing steep ramps with loads. Three or four stage masts are available making these units excellent for loading/unloading trailers and containers. They can also work inside and outside on paved surfaces and have a floating front axle allowing the trucks to ride smoothly over uneven floors. The Bendi 4-wheel Multi-Purpose Articulating line does all of the jobs of reach and counterbalanced trucks but in much narrower aisles.

  • 3,000 lb. to 5,500 lb. capacity at 24 in. load center
  • AC traction and hydraulic motors ensure minimal maintenance and high efficiency
  • Interactive LCD status monitor (BDI with lift interrupt, hour meter with service monitor, diagnostic code display, input device calibration)
  • 48 Volt electrical system
  • Four-wheel design, dual rear wheel drive provides excellent power, braking and traction
  • Integral wide stroke sideshifter makes placing and picking loads effortless
  • Independently controlled rear wheels allow independent speed control of each drive tire based on steering angle
  • DuraSteer front wheel hydraulic steering provides smooth, reliable, long-lasting steering control
  • High-efficiency Curtis AC controllers provide trouble free operation
  • Ergonomic design for exceptional operator comfort and safety
  • High visibility mast allows optimum safety and control
  • Ergonomic design for exceptional operator comfort and safety
  • Creep speed mode adds enhanced control when handling loads at high elevations or while training operators
  • Non-standard fork lengths
  • Auxiliary hydraulics
  • Non-marking tires
  • LED headlights, flashing light and rear safety lights
  • Back-up alarm – beeping tone
  • Blue pedestrian warning lights
  • Fire extinguisher – OHG post mounted
  • Roller/Slide out battery tray
  • Lazer fork height indicator
  • Hydraulic integral fork positioner
  • Hydraulic fork extensions
  • Camera with monitor in operator’s compartment
  • Optional cold storage conditioned to -22°F (-30°C)

Specs

3,000 - 5,500 LBS. LOAD CAPACITY
43 - 56 IN.WIDTH
48VOPERATING VOLTAGE
Multi-Purpose Articulating Electric
B30AC or B40ACUP TO 31 FT. LIFT HEIGHT
Multi-Purpose Articulating Electric
B40AC-HL or B50AC-HLUP TO 41 FT. LIFT HEIGHT
Multi-Purpose Articulating Electric
B55ACUP TO 30 FT. LIFT HEIGHT
MODEL NUMBERLOAD CAPACITY* (lbs.)LIFT HEIGHTS (in.)OVERALL WIDTH (in.)MINIMUM AISLE WIDTH (in.)
B30AC3,000188- 2724370
B40AC4,000188 - 3744870
B40AC-HL4,400312 - 4925070
B50AC-HL5,000312 - 4925476
B55AC5,500188 - 3605678

* Based on 24" Load center
Product specifications may not reflect the most current product details.